Cantilever shelf as long or circular material, flat products, pipe and irregular goods shelves of the most commonly used form, has the stable structure, good load capacity, high space utilization, etc, that's how institutions and technology make it achieve good load-bearing, following by the baode dragon shelves to introduce:
material, plate material and irregular shape etc. Forward the cantilever can be single or double sided, with light structure, carrying capacity good characteristic, single arm bearing up to 500 kg. Special reinforced column structure, which can be 2000 ~ 3000 kg under pressure. Design back increased shelf overall stability, and easy to install, complete accessories. Composite structure, special shaped column, the design back to increase stability, with high strength cantilever (arm can be single or double), with light structure, good load capacity, high space utilization; Added after the racks, especially suitable for the space is little, low height of warehouse, convenient management, wide vision, compared with the pallet racking, utilization rate is higher; According to the bearing capacity can be divided into light cantilever racking, medium cantilever shelves, heavy cantilever racking three; Suitable for long, plank, ring material and the irregular cargo storage.
The cantilever shelf production process:
Cantilever rack can be used the base of the h-beam or special profiles. Selects the h-beam according to national standard of steel bearing requirements of the corresponding choice. Starting with stud bolt connection in h-beam above, facilitating and column connections. Under welding connection plate, plate above the open eye bolts, facilitate the shelves with bolts connected with the ground. At a fixed shelves.
Cantilever racking choose special material base, the two pieces of C payments back to back with connecting plates welded together, the width of the connecting plate is the width of the columns. Two pieces of C payments after completion of welding in the connection connecting bolts upright position open eyes, facilitate with column connections. Edge welding connection plate, easy expansion bolt connection with the ground.
Cantilever rack column using two pieces of C steel welded together. C steel Q235 steel strip quality as raw material, after rolling mill line into C payments, rushed out of the cantilever connection control on automatic punching machine, hole spacing is 140 mm. If use at the bottom of the column and h-beam connection way to connect the welding a piece of steel plate. If use with special profile connection will connection bolt connection open hole at the bottom of the column.
The cantilever shelf generally USES two kinds of materials:
1, the party controls: cantilever shelves according to the requirements of the corresponding layer cantilever load, first selected to meet the requirements of layer load square tube, cut into need to size, in a welding antiskid plate, on the other side welding connection U stud connectors.
2, C payments production: cantilever shelves according to the requirements of the corresponding layer cantilever load, C payments of the specifications of the selected first, choose good after the two pieces of C steel butt welding, after welding is good in a head welding antiskid plate, welding to connect U stud connectors on the other side.
Cantilever shelf between column and column pills USES link rod, connecting rod generally USES rectangular controls. To increase the security and stability of the connection rod with a flat iron back pull to special column can be fixed tightly.
All components of the cantilever shelf after completion of the production of semi-finished products, will be the last line of plastic spraying process. Before coating of shot blasting machine oil removal, rust removal, and then to plastic spraying. After the completion of the package delivery.
COMPANY：Anhui Botro Racking Manufacture Co., Ltd.
Add：South end of Industrial Avenue, industrial park, branching Town, Tianchang, Anhui